Floor Screeds

Floor Screeds

Industrial floor screeding is one of the most important steps to ensure a professional quality finish and good durability. PSR are specialists in using industrial floor screed to level out and protect surfaces in industrial premises.

The Process

Dust free floor preparation is a key part of the success of our industrial floor screeding.

Concrete surfaces must be sound, dry and fully cured.

Any laitance or surface treatments must be removed by mechanical means, such as dust free diamond grinding, and the surface tensile strength of the substrate should be a minimum of 15 N/mm2.

If an impervious coating, screed or floor covering is to be used, the Industrial floor screed substrate should be below 75% RH. Alternately, an Epoxy DPM should be applied.

The temperature of the floor must be maintained above 5°C throughout the application and for the drying of the base or topping Screed.

Coloured topping products can be supplied for a wide range of aesthetically pleasing finishes.

Floor Screed Benefits

Our floor screed service is designed as an industrial grade floor topping for upgrading and renovating new and existing internal floors.

  • Protect and maintain high-traffic areas
  • Free quotations and site visits
  • 99% dust free!
  • Highly qualified and experienced team
  • PSR Industrial branded coatings
  • Any RAL or BS colours available

If you’re thinking about industrial floor screeding to renovate and protect your floors, get in touch today for no obligation advice or a free site visit.

Based in Barnsley, our expert team would be happy to hear from you, no matter your industrial flooring needs.

With over 20 years’ experience, we can advise on the most appropriate product for your industrial premises.

Get in touch